- DS-2CD4B16FWD-IZ(S)
| Camera | ||
|---|---|---|
| Image Sensor: | | | 1/3″ Progressive Scan CMOS |
| Min. Illumination: | | | Color: 0.005 Lux @ (F1.2, AGC ON), 0.007 Lux @ (F1.4, AGC ON), 0 Lux with IR B/W: 0.0005 Lux @ (F1.2, AGC ON), 0.0007 Lux @ (F1.4, AGC ON), 0 Lux with IR |
| Shutter time: | | | 1 s – 1/100,000 s |
| Slow shutter: | | | Support |
| Lens: | | | 2.8 – 12 mm F1.4, horizontal angle of view 98.4° – 30.2° |
| Lens Mount: | | | φ14 |
| Auto Iris: | | | DC drive |
| Adjustment Range: | | | Pan: 0° to 360°, tilt: 0° to 100°, rotate: 0° to 360° |
| Day& Night: | | | IR cut filter with auto switch |
| Wide Dynamic Range: | | | 120 dB |
| Digital noise reduction: | | | 3D DNR |
| Compression Standard | ||
| Video Compression: | | | H.264/MJPEG/H.264+ |
| H.264 code profile: | | | Baseline Profile/Main Profile/High Profile |
| Video bit rate: | | | 32Kbps~16Mbps |
| Audio bit rate: | | | 64Kbps(G.711)/16Kbps(G.722.1)/16Kbps(G.726)/32-192Kbps(MP2L2) |
| Image | ||
| Max. Image Resolution: | | | 1280×960 |
| Main Stream: | | | 50Hz: 50fps (1280 × 960, 1280 × 720, 704 × 576, 640 × 480) 60Hz: 60fps (1280 × 960, 1280 × 720, 704 × 480, 640 × 480) |
| Third Stream: | | | 50Hz: 25fps (1280 × 960, 1280 × 720, 704 × 576, 640 × 480, 352 × 288, 320 × 240) 60Hz: 30fps (1280 × 960, 1280 × 720, 704 × 480, 640 × 480, 352 × 240, 320 × 240) |
| Image Enhancement: | | | BLC/HLC/3D DNR/Defog/EIS |
| Image Settings: | | | Rotate Mode, Saturation, Brightness, Contrast, Sharpness adjustable by client
software or web browser |
| ROI: | | | Support 4 fixed region for each stream, and dynamic face tracking |
| Picture Overlay: | | | LOGO picture can be overlaid on video with 128 × 128 24bit bmp format |
| Day/Night Switch: | | | Auto/Schedule/Triggered by Alarm In (-S) |
| Network | ||
| Network Storage: | | | Micro SD/SDHC/SDXC card with ANR (up to 128G), NAS (Support NFS, SMB/CIFS) |
| Alarm Trigger: | | | Motion detection, Dynamic Analysis, Tampering alarm, Network disconnect,
IP address conflict, Storage exception |
| Protocols: | | | TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP,
PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, UDP, Bonjour |
| System Compatibility: | | | ONVIF (Profile S, Profile G), PSIA, CGI, ISAPI |
| Interface | ||
| Communication Interface: | | | 1 RJ45 10M / 100M Ethernet interface and 1 RS-485 interface |
| Alarm: | | | With –S model: 1 input, 1 output (up to DC24V 1A or AC110V 500mA) |
| Video Output: | | | 1Vp-p Composite Output (75 Ω, BNC) |
| On-board storage: | | | Built-in Micro SD/SDHC/SDXC slot, up to 128 GB |
| Reset Button: | | | Yes |
| Audio | ||
| Environment Noise Filtering: | | | Support(-S) |
| Audio I/O: | | | Support dual audio track, stereo (-S) |
| Smart Feature-set | ||
| Behavior Analysis: | | | Line crossing detection, Intrusion detection, Region entrance, Region exiting,
Unattended baggage, Object removal |
| Line Crossing Detection: | | | Cross a pre-defined virtual line |
| Intrusion Detection: | | | Enter and loiter in a pre-defined virtual region |
| Region Entrance: | | | Enter a pre-defined virtual region from the outside place |
| Region Exiting: | | | Exit from a pre-defined virtual region |
| Unattended Baggage: | | | Objects left over in the pre-defined region such as the baggage, purse, dangerous materials |
| Object Removal: | | | Objects removed from the pre-defined region, such as the exhibits on display. |
| General | ||
| Operating Conditions: | | | -30 °C ~ 60 °C (-22 °F ~ 140 °F) Humidity 95% or less (non-condensing) |
| Power Supply: | | | 12 V DC ± 20%, PoE (802.3at) |
| Power Consumption: | | | 12 V DC ± 20%: Max. 11.25 W/0.94 A PoE (802.3at): Max. 15 W/0.31 A |
| Weather Proof: | | | IP67 |
| IR Range: | | | Approx. 10 to 30 meters |
| Dimensions: | | | 348.38 × 114.18 ×111.73 mm (13.72″ × 4.5″ × 4.4″) |
| Weight: | | | Camera: 1900 g (4.19 lb.) With package: 2100 g (4.63 lb.) |
